Recently i was asked a question on the important note on the Exadata Information Center and be updated with the latest updates and patches. Here are the details :
Saturday, 14 August 2021
Wednesday, 24 February 2021
Server Time Synchronization with Chrony in Exadata System Software release 19.1.0
Server Time Synchronization Uses Chrony
Starting with Oracle Exadata System Software release 19.1.0, Exadata database servers and storage severs running Oracle Linux 7 no longer use ntpd. Instead, chrony is used to synchronize the system clock on the servers with NTP servers. chrony can usually synchronize the system clock faster and with better time accuracy compared to ntpd.
When you upgrade from Oracle Linux 6 to Oracle Linux 7, the NTP server settings are migrated to chrony. All Oracle Grid Infrastructure and Oracle Database releases certified with Oracle Linux 7 also support chrony.
Minimum requirements:
Oracle Exadata System Software release 19.1.0
chrony vs ntp
Things chrony can do better than ntp:
chrony can perform usefully in an environment where access to the time reference is intermittent. ntp needs regular polling of the reference to work well.
chrony can usually synchronise the clock faster and with better time accuracy.
chrony quickly adapts to sudden changes in the rate of the clock (e.g. due to changes in the temperature of the crystal oscillator). ntp may need a long time to settle down again.
chrony can perform well even when the network is congested for longer periods of time.
chrony in the default configuration never steps the time to not upset other running programs. ntp can be configured to never step the time too, but in that case it has to use a different means of adjusting the clock (daemon loop instead of kernel discipline), which may have a negative effect on accuracy of the clock.
chrony can adjust the rate of the clock in a larger range, which allows it to operate even on machines with broken or unstable clock (e.g. in some virtual machines).
chrony is smaller, it uses less memory and it wakes up the CPU only when necessary, which is better for power saving.
Things chrony can do that ntp can’t:
chrony supports the Network Time Security (NTS) authentication mechanism.
chrony supports hardware timestamping on Linux, which allows an extremely stable and accurate synchronisation in local network.
Chrony provides support for isolated networks whether the only method of time correction is manual entry (e.g. by the administrator looking at a clock). chrony can look at the errors corrected at different updates to work out the rate at which the computer gains or loses time, and use this estimate to trim the computer clock subsequently.
Chrony provides support to work out the gain or loss rate of the real-time clock, i.e. the clock that maintains the time when the computer is turned off. It can use this data when the system boots to set the system time from a corrected version of the real-time clock. These real-time clock facilities are only available on Linux, so far.
Things ntp can do that chrony can’t:
- ntp supports all operating modes from RFC 5905, including broadcast, multicast, and manycast server/client. However, the broadcast and multicast modes are inherently less accurate and less secure (even with authentication) than the ordinary server/client mode, and should generally be avoided.
- ntp supports the Autokey protocol (RFC 5906) to authenticate servers with public-key cryptography. Note that the protocol has been shown to be insecure and has been obsoleted by NTS (RFC 8915).
- ntp has been ported to more operating systems.
- ntp includes a large number of drivers for various hardware reference clocks. chrony requires other programs (e.g. gpsd or ntp-refclock) to provide reference time via the SHM or SOCK interface.
For more details refer to https://chrony.tuxfamily.org/comparison.html
Saturday, 30 January 2021
Immuning code from SQL INJECTION Attacks in Oracle (Part 1)
There are various methods of how the plsql coders write their code to avoid sql injection attacks, and here we will see some methods and tips of how we can really protect the code. The tests here below are on 19.3 Oracle Version.
Native dynamic SQL code what i feel is actually little easy to read and write than the code that uses the DBMS_SQL package, and runs much faster specially when it can be optimized by the compiler. But thats not the point of our discussion, the point is that SQL injection is a pretty famous attack and we can avoid this with strict adherence to some basic coding practices....Assuming that you know the concepts of dynamic sql and then bind arguments, and what oracle says you must use dynamic SQL and not only this using bind arguments protects us against SQL injection attacks. Using bind arguments also enables cursor sharing, and thus improves application performance.
If an interface is not available to an attacker, it is clearly not available to be abused. Thus the first, and arguably most important, line of defense is to reduce the exposed interfaces to only those absolutely required.
Be alert of the following rights :=
Use Definer's Right: When you want to provide users unrestricted access to a table or tables via a subprogram, create the subprogram with definer's right.
Use Invoker's Right: When the purpose of the subprogram is to perform a parameterized, but powerful, operation by using the privileges of the user that invokes it, create the subprogram with invoker's right. Using invoker's rights helps to limit the privileges, and thereby, minimize the security exposure. However, it is not sufficient as the sole measure for eliminating SQL injection vulnerabilities.
Invoker's rights helps to minimize the security exposure
For the following procedure if you give execute privilege to HR user lets say, HR user would only be able to change the password of any user including the user SYS only if he has the ALTER USER system privilege.
create or replace procedure change_password (p_username varchar2 default null,p_new_password varchar2 default null)
is
v_sql_stmt varchar2(500);
begin
v_sql_stmt := 'ALTER USER '||p_username||' IDENTIFIED BY '||p_new_password;
execute immediate v_sql_stmt;
end change_password;
/
How bind arguments should be used ? Basically complete protected code from sql injection attack can be achieved only through elimination of input string concatenation in dynamic SQL, so 1 should avoid input string concatenation and use bind arguments be it automatically through static SQL or explicitly through dynamic SQL statements. A basic code of how bind arguments are used is below :=
create or replace procedure sum_it_up
( a number, b number, c number)
is
begin
dbms_output.put_line(a+b+c);
end;
/
DECLARE
x NUMBER := 2;
y NUMBER := 5;
plsql_block VARCHAR2(100);
BEGIN
plsql_block := 'BEGIN sum_it_up(:g, :g, :h); END;';
EXECUTE IMMEDIATE plsql_block USING x, y;
END;
/
How to reduce the actual attack, below we will see how the code is not immune in the first go and then how the code is immune in the following 2 cases ( PROCEDURE GET_CODE), below is the table of citizens where humas have their social security number which is the most private number and shall be hidden or protected :=
SQL> create table citizens (fname varchar2(20),lname varchar2(20), s_security_num number);
Table created.
SQL> insert into citizens values ('karan','dodwal',10034007);
1 row created.
SQL> insert into citizens values ('ram','singh',10059991);
1 row created.
SQL> commit;
Commit complete.
--FIRST ORDER ATTACK
Now look how it is vulnuerable in the following code
create or replace procedure get_code (p_fname varchar2 default null)
is
type c is ref cursor;
cv c;
vcode citizens.s_security_num%type;
v_stmt varchar2(300);
begin
v_stmt := 'select s_security_num from citizens where fname='''||p_fname||'''';
dbms_output.put_line('sql query : '||v_stmt);
open cv for v_stmt;
loop
fetch cv into vcode;
exit when cv%notfound;
dbms_output.put_line('code is '||vcode);
end loop;
close cv;
exception when others then
dbms_output.put_line(sqlerrm);
dbms_output.put_line('sql query '||v_stmt);
end;
/
Social security number of only ram is printed in the following output
SQL> exec get_code('ram');
sql query : select s_security_num from citizens where fname='ram'
code is 10059991
PL/SQL procedure successfully completed.
But look below how the Social security number of KARAN is also printed without even knowing RAM or KARAN, just by dummy ''X''
SQL> exec get_code('x'' union select s_security_num from citizens where ''x''=''x');
sql query : select s_security_num from t1 where fname='x' union select
s_security_num from t1 where 'x'='x'
code is 10034007
code is 10059991
ISNT IT REALLY BAD...
--PROTECTION
--Now see how it isnt vulnuerable in the following code because here we are avoiding the use of dynamic SQL with concatenated input values
create or replace procedure get_code (p_fname varchar2)
is
begin
for i in (select s_security_num from citizens where fname=p_fname)
loop
dbms_output.put_line(i.s_security_num);
end loop;
end;
/
Social security number of only ram is printed in the following output
SQL> exec get_code('ram');
10059991
PL/SQL procedure successfully completed.
But look below how neither of Social security numbers are printed and attacker is defeated clearly
SQL> exec get_code('x'' union select s_security_num from citizens where ''x''=''x');
PL/SQL procedure successfully completed.
In my subsequent posts i will share with you other protection mechanisms, but for the time being i wish you all happy new year and also do note the following practices to observe when you secure the Oracle database:
1) Encrypt sensitive data so that it cannot be viewed.
2) Evaluate all PUBLIC privileges and revoke them where possible.
3) Do not widely grant EXECUTE ANY PROCEDURE.
4) Avoid granting privileges WITH ADMIN option.
5) Ensure that application users are granted minimum privileges by default. Make privileges configurable if necessary.
6) Do not allow wide access to any standard Oracle packages that can operate on the operating system. These packages include:
UTL_HTTP, UTL_SMTP, UTL_TCP, DBMS_PIPE, UTL_MAIL, and UTL_FTP
7) Certain Oracle packages such as UTL_FILE and DBMS_LOB are governed by the privilege model of the Oracle DIRECTORY object. Protect Oracle DIRECTORY objects.
8) Lock the database default accounts and expire the default passwords.
9) Remove example scripts and programs from the Oracle directory.
10) Run the database listener as a nonprivileged user.
11) Ensure that password management is active.
12) Enforce password management. Apply basic password management rules, such as password length, history, and complexity, to all user passwords. Mandate that all the users change their passwords regularly.
13) Lock and expire the default user accounts and change the default user password.
Tuesday, 8 December 2020
ORA-01194 after Control file Restore in Oracle and willing to do complete recovery
I got this complaint from one of the customer that they were not able to recover the database post controlfile restore, so lets have a look what happened.
My oracle version is this :
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0
So lets restart our database with startup force (shutdown abort & startup)
SQL> startup force
ORACLE instance started.
Total System Global Area 3321886736 bytes
Fixed Size 9140240 bytes
Variable Size 704643072 bytes
Database Buffers 2600468480 bytes
Redo Buffers 7634944 bytes
ORA-00205: error in identifying control file, check alert log for more info
* So i have to restore controlfile now
[oracle@rhel7 PROD]$ rman target/
Recovery Manager: Release 19.0.0.0.0 - Production on Wed Dec 9 00:09:27 2020
Version 19.3.0.0.0
Copyright (c) 1982, 2019, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD (not mounted)
RMAN> restore controlfile from '/u01/app/oracle/fast_recovery_area/PROD/autobackup/2020_12_08/o1_mf_s_1058658290_hwzjnw2h_.bkp';
Starting restore at 09-DEC-20
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/u01/app/oracle/oradata/PROD/control01.ctl
output file name=/u01/app/oracle/fast_recovery_area/PROD/control02.ctl
Finished restore at 09-DEC-20
SQL> alter database mount;
Database altered.
SQL> alter database open ;
alter database open
*
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
*
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/app/oracle/oradata/PROD/system01.dbf'
* Thats it , this is the error :
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 2290523 generated at 12/08/2020 23:41:34 needed for thread 1
ORA-00289: suggestion :
/u01/app/oracle/fast_recovery_area/PROD/archivelog/2020_12_09/o1_mf_1_9_%u_.arc
ORA-00280: change 2290523 for thread 1 is in sequence #9
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'/u01/app/oracle/fast_recovery_area/PROD/archivelog/2020_12_09/o1_mf_1_9_%u_.arc
'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 7
ORA-00308: cannot open archived log
'/u01/app/oracle/fast_recovery_area/PROD/archivelog/2020_12_09/o1_mf_1_9_%u_.arc
'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 7
* So the problem here is we are not able to recover the database because we dont have enough redo changes to be applied to do complete recovery.
When we do recovery from RMAN , its intelligent enough to understand it and applies the redo logfile redo03.log that needs to applied.
RMAN> recover database;
Starting recover at 09-DEC-20
released channel: ORA_DISK_1
Starting implicit crosscheck backup at 09-DEC-20
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=39 device type=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 09-DEC-20
Starting implicit crosscheck copy at 09-DEC-20
using channel ORA_DISK_1
Finished implicit crosscheck copy at 09-DEC-20
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /u01/app/oracle/fast_recovery_area/PROD/autobackup/2020_12_08/o1_mf_s_1058658290_hwzjnw2h_.bkp
using channel ORA_DISK_1
starting media recovery
archived log for thread 1 with sequence 9 is already on disk as file /u01/app/oracle/oradata/PROD/redo03.log
archived log file name=/u01/app/oracle/oradata/PROD/redo03.log thread=1 sequence=9
media recovery complete, elapsed time: 00:00:00
Finished recover at 09-DEC-20
** Remember ** Although RMAN works for us, but in case you wanted to use sqlplus itself , so you should have done this assuming redo01.log was required if it was sequence 1 which was missing :
SQL> recover database using backup controlfile;
ORA-00279: change 2294948 generated at 12/09/2020 00:18:15 needed for thread 1
ORA-00289: suggestion :
/u01/app/oracle/fast_recovery_area/PROD/archivelog/2020_12_09/o1_mf_1_1_%u_.arc
ORA-00280: change 2294948 for thread 1 is in sequence #1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
'/u01/app/oracle/oradata/PROD/redo01.log'
Log applied.
Media recovery complete.
** thats it, we are able to open the database now. Happy days
SQL> alter database open resetlogs;
Database altered.
Friday, 2 October 2020
Loading plans in the baselines with a Linux Shell script.
Its a monday morning and Smith the junior dba is muddled since some developers are chasing him to load a good current plan in the baseline to avoid plan regression, Smith being relatively a new and a junior dba is not quite familiar on how he should use plsql and is complacent to do so, since he thinks the plsql code might load everything from shared pool to the baselines and might cause some issues if any, So what Smith does is, he calls Martin the senior dba and asks him if he can help him, Martin replies he already has a shell script which does that, all Smith would need to do is pass the sql id in the shell script argument as a $1and that would do the job. Smith couldnt be more happier and that makes his day.
The shell script is given below in this article , so what it does is, $1 as we are aware is the first argument when any shell script is invoked and $2 and $3 .. and so on could be used for as many arguments as much as you want but here we just need 1 argument to the job. So here $1 we use to pass the sql id in the plsql block of the shell script, please note we use $1 not the oracle plsql &a for that matter. Make sure you give executable permission to this script to make it work with chmod u+x spm.sh
[oracle@node2 dk]$ cat spm.sh
sqlplus / as sysdba << EOF
set echo off
set feedback off
set pages 0
set lin 100
set sqlnumber off
set serveroutput on
declare
a pls_integer;
begin
a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '$1');
dbms_output.put_line(a|| ' plans loaded in the baseline');
end;
/
exit;
EOF
Lets run the code
[oracle@node2 dk]$ ./spm.sh 1uw84jcq6802a
Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0
SQL>
1 plans loaded in the baseline
SQL> Disconnected from Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0
# So there you go , 1 plans loaded in the baseline is successfully returned as per our dbms_output.
Could we validate our plsql block to make sure it works as expected without the shell cover. Lets see :
SQL> declare
a pls_integer;
begin
a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '&a');
dbms_output.put_line(a|| ' plans loaded in the baseline');
end;
/
2 3 4 5 6 7 Enter value for a:
old 4: a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '&a');
new 4: a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '');
0 plans loaded in the baseline
PL/SQL procedure successfully completed.
So here above we have zero plans loaded because we passed null value
SQL> /
Enter value for a: 1uw84jcq6802a
old 4: a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '&a');
new 4: a := DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE(sql_id => '1uw84jcq6802a');
1 plans loaded in the baseline
PL/SQL procedure successfully completed.
So here above we give a valid sql id and it makes sure it is loaded in the baseline.
SQL> select count(*) from dba_sql_plan_baselines;
COUNT(*)
----------
1
So yes it does work. Happy shell scripting
Saturday, 12 September 2020
Managing the network with Network manager in Redhat Enterprise Linux 7
With the introduction of RHEL7 there is a new profile based network management. Like many other Daemons Network Manager in RHEL 7 is also a Daemon, it monitors and manages the network settings. Network manager can be managed using nmcli and other graphical tools. In Red Hat Enterprise Linux 7 please note this is the default networking service and is provided by Network Manager, basically this service is a dynamic network service control and there is a configuration daemon to keep network devices and connections up and active when they are available. An interesting thing to note is that the traditional ifcfg type configuration files are still supported which i will cover in this post.
The main advantage of this utility is that managing the networking is way much easier: Network Manager ensures that network connectivity works. When it detects that there is no network configuration in a system but there are network devices, Network Manager creates temporary connections to provide connectivity.
These tools will automatically update /etc/sysconfig/network-scripts in the back-end. So as we are aware commands and graphical tools are updating the network configuration files, human errors are eliminated.
Lets see how Network Manager works :
# First i will start my current network interface, The ifup command basically brings the network interface up, allowing it to transmit and receive data. Technically ifup command is used to configure network interfaces based on interface definitions in the file /etc/network/interfaces.
[root@node2 Desktop]# cd /etc/sysconfig/network-scripts/
[root@node2 network-scripts]# ifup ifcfg-eno16777736
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/0)
# Lets get into network manager now, Current devices
[root@node2 ~]# nmcli con show
NAME UUID TYPE DEVICE
eno16777736 bcc252b1-98d3-4fb6-a005-2caad8422622 802-3-ethernet eno16777736
# Now lets make a new connection named as "RHEL_NEW" which will automatically connect as an Ethernet connection eth0 device using DHCP.
[root@node2 ~]# nmcli con add con-name "RHEL_NEW" type ethernet ifname eth0
Connection 'RHEL_NEW' (5f87ee25-7007-4a35-b343-8e1351443f54) successfully added.
# Lets confirm it
[root@node2 ~]# nmcli con show
NAME UUID TYPE DEVICE
RHEL_NEW 5f87ee25-7007-4a35-b343-8e1351443f54 802-3-ethernet --
eno16777736 bcc252b1-98d3-4fb6-a005-2caad8422622 802-3-ethernet eno16777736
# Lets configure the static IP for the new connection, you need to specify the IP address and gateway.
[root@node2 network-scripts]# nmcli con add con-name "RHEL_NEW" ifname eth0 autoconnect no type ethernet ip4 192.9.0.10/24 gw4 192.9.0.254
Connection 'RHEL_NEW' (61a29c5f-72fd-4b4c-b850-1f139dd8d03b) successfully added.
# So when we try to bring up the interface we face this issue, lets troubleshoot it
[root@node2 network-scripts]# nmcli connection up RHEL_NEW
Error: no device found for connection 'RHEL_NEW'.
[root@node2 network-scripts]# systemctl -l status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed (Result: exit-code) since Sat 2020-09-12 13:16:53 IST; 1min 0s ago
Process: 3240 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)
Process: 4047 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com network[4047]: RTNETLINK answers: File exists
Sep 12 13:16:53 node2.example.com systemd[1]: network.service: control process exited, code=exited status=1
Sep 12 13:16:53 node2.example.com systemd[1]: Failed to start LSB: Bring up/down networking.
Sep 12 13:16:53 node2.example.com systemd[1]: Unit network.service entered failed state.
Not to forget i am in directory /etc/sysconfig/network-scripts
[root@node2 network-scripts]# pwd
/etc/sysconfig/network-scripts
Making sure hardware address was put in the network interface was up post that
[root@node2 network-scripts]# cat ifcfg-RHEL_NEW
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=RHEL_NEW
UUID=5f87ee25-7007-4a35-b343-8e1351443f54
ONBOOT=yes
HWADDR=00:0C:29:63:30:DE
NM_CONTROLLED=no
IPADDR0=192.9.0.10
PREFIX0=24
GATEWAY0=192.9.0.254
DNS1=192.9.0.254
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
[root@node2 network-scripts]# nmcli connection up RHEL_NEW
Connection successfully activated
# As mentioned earlier in this post this works with ifdown and ifup as well
[root@node2 network-scripts]# ifdown ifcfg-RHEL_NEW
[root@node2 network-scripts]# ifup ifcfg-RHEL_NEW
NetworkManager is installed by default on Red Hat Enterprise Linux. If it is not, enter as root:
~]# yum install NetworkManager
To check whether NetworkManager is running:
~]$ systemctl status NetworkManager
NetworkManager.service - Network Manager
Loaded: loaded (/lib/systemd/system/NetworkManager.service; enabled)
Active: active (running) since Fri, 11 Sep 2020 11:30:04 +0100; 1 days ago
Note that the systemctl status command displays Active: inactive (dead) when NetworkManager is not running.
To start NetworkManager:
~]# systemctl start NetworkManager
To enable NetworkManager automatically at boot time:
~]# systemctl enable NetworkManager
nmcli is the one way of working with networking manager, while you can still use nmtui, nm-connection-editor, control-center, network connection icon.
Lets understand about these options :
nmcli : A command-line tool which enables users and scripts to interact with NetworkManager. Note that nmcli can be used on systems without a GUI such as servers to control all aspects of NetworkManager. It has the same functionality as GUI tools.
nmtui : A simple curses-based text user interface (TUI) for NetworkManager
nm-connection-editor : A graphical user interface tool for certain tasks not yet handled by the control-center utility such as configuring bonds and teaming connections. You can add, remove, and modify network connections stored by NetworkManager. To start it, enter nm-connection-editor in a terminal.
control-center : A graphical user interface tool provided by the GNOME Shell, available for desktop users. It incorporates a Network settings tool. To start it, press the Super key to enter the Activities Overview, type Network and then press Enter. The Network settings tool appears.
network connection icon : A graphical user interface tool provided by the GNOME Shell representing network connection states as reported by NetworkManager. The icon has multiple states that serve as visual indicators for the type of connection you are currently using.
Tuesday, 14 July 2020
Create a gold image for 19c Oracle Database Software Home
[oracle@rhel7 ~]$ $ORACLE_HOME/runInstaller -silent -createGoldImage -destinationLocation /u01/software/19c_dbhome
Launching Oracle Database Setup Wizard...
[FATAL] [INS-32707] The specified destination location (/u01/software/19c_dbhome) does not have enough free space.
ACTION: Provide a destination location path with at least (76,112) MB of free space.
So once the space was made available i was able to make the gold image from the software home
[oracle@rhel7 ~]$ $ORACLE_HOME/runInstaller -silent -createGoldImage -destinationLocation /u01/software/19c_dbhome
Launching Oracle Database Setup Wizard...
......
.................
.................................
Successfully Setup Software.
Gold Image location: /u01/software/19c_dbhome/db_home_2020-07-14_09-15-53PM.zip